–
No rating yetBased on 1 review
Up to 40% less concrete consumption and no lost drill tip. The foundation pile with the smallest ecological and economic footprint. An Olivier® pile is a patented drilled displacement pile made of concrete or reinforced concrete with a screw-shaped shaft (helical shaft) which is performed without soil removal. Due to its screw-shaped shaft, the Olivier pile is particularly suitable for use in soils with low load-bearing capacities, such as clay and loam, but can be applied in almost all types of soil. ontrary to traditional FDP piles, the Olivier pile is 100% displaced until the bottom of the pile and no soil is transported to the surface.
Company details
Information compiled from public sources
Up to 40% less concrete consumption and no lost drill tip. The foundation pile with the smallest ecological and economic footprint. An Olivier® pile is a patented drilled displacement pile made of concrete or reinforced concrete with a screw-shaped shaft (helical shaft) which is performed without soil removal. Due to its screw-shaped shaft, the Olivier pile is particularly suitable for use in soils with low load-bearing capacities, such as clay and loam, but can be applied in almost all types of soil. ontrary to traditional FDP piles, the Olivier pile is 100% displaced until the bottom of the pile and no soil is transported to the surface.
Patented FTP pile system
- An Olivier® pile is a patented drilled displacement pile made of concrete or reinforced concrete with a screw-shaped shaft (helical shaft) which is performed without soil removal. Due to its screw-shaped shaft, the Olivier pile is particularly suitable for use in soils with low load-bearing capacities, such as clay and loam, but can be applied in almost all types of soil. ontrary to traditional FDP piles, the Olivier pile is 100% displaced until the bottom of the pile and no soil is transported to the surface. An Olivier pile can be made with any foundation machine with a minimum torque from 10t/m.
Contact info
- Belgium
Featured models
Picked by Olivier
Models by Olivier
Latest additions to the catalog
What owners say about Olivier
Reviews, questions and photos from people who run the machines
We moderate reviews before they're published, but we don't fact-check them
Reviews are written by equipment owners and operators. Our team looks over each review before it goes live, and anyone can report a review they think breaks the rules.
We don't verify the claims made in reviews, so each one reflects the reviewer's own experience. Some reviews may have been collected from other public sources. Brands can reply to reviews but can't edit or remove them.
See something wrong? Let us know.
–
No rating yetBased on 1 reviews
Performance
5.00/5
Reliability
5.00/5
Support
5.00/5
Sort by
Relevance
great
Posted on Aug, 15 2024
The new Olivier coupling, available for pipes starting at 133mm (5”¼), addresses several drawbacks of the classic version. It eliminates the need for screws and matches almost the same diameter as the drilling pipe. The inner diameter remains unchanged from the classic coupling. Additionally, the plugs have been modified and rounded to fit the coupling’s radius. These improvements result in a significantly reduced wear factor compared to the classic Olivier coupling. Due to the absence of screws, there is no longer a threaded hole in the male side. This means that the interior of the male part is now completely sealed. The new Olivier coupling is available in two versions: with 8 plugs and with 16 plugs. The choice depends on the specific application and the required drilling torque.
Posted on Aug, 15 2024
by Goran Z.
25 contributionsIs this review helpful?
0
