Discover Mori Newest Products
Similar Models
DPM 50/80 grappler
Mori
5.0
Outstanding
Based on 1 reviews
Premium quality rod and casing grappler , to help rod and casing in a same time. DPM 50/80 is a robust but versatile rod and casing grappler , with proven track record. 360 degrees, easy excavator installation
PM 20/35
Mori
0.0
No Rating
Based on 0 reviews
The PM 20/35 is a handling device for rods and casing to be installed on an excavator. It has been developed to facilitate the loading/unloading of drilling equipment (Rods, Casing and Augers) on the job site, with great advantages in terms of productivity and safety. The PM 20/35 is available with a single clamp, with interchangeable diameters inserts, capable to load and unload rods or casing individually.
M20 Alpine
Mori
0.0
No Rating
Based on 0 reviews
The M20 ALPINE is a special drilling rig designed to be transported by helicopter. The use of special steels and aircraft-grade aluminium means the machine has a reduced weight, and the ability to be dismantled into several pieces allows it to be transported by helicopter and to work in areas not accessible by normal means of transport, such as particularly inaccessible mountain areas. The M20 ALPINE equipped with a drifter is the ideal machine for performing micropiles, anchors and riveting with self-drilling bars. Like all MORI drilling rigs, the M 20 ALPINE can be customised according to customer requirements.
M41
Mori
0.0
No Rating
Based on 0 reviews
The M 41is a hydraulic drilling rig with a separate diesel power unit designed to carry out micro/minipiles, anchors, etc., in difficult-to-reach areas such as the interior of houses. The module mast design enables it to perform drilling in spaces with a maximum height of 2.50 metres. The various joints combined with its exceptional compactness make it extremely versatile. The hydraulic unit can be equipped with either wheels or crawler. The machine can be equipped with a MORI remote control. Like all MORI drilling rigs, the M 41 can be customised according to customer requirements.
M20
Mori
0.0
No Rating
Based on 0 reviews
The M 20 boasts excellent versatility and, due to its compactness, was purposefully designed to carry out micro/minipiles, anchors, etc., in particularly awkward working areas. The electro-welded steel structures ensure its sturdiness and the good distribution of its masses favours its stability The optimized hydraulic system, the modularity of the components, the possible movements and the easy access to controls by the operator have all been appropriately designed in accordance with current occupational health and safety regulations. Like all MORI drilling rigs, the M20 can be customized according to customer requirements.
M21
Mori
0.0
No Rating
Based on 0 reviews
The M 21is a hydraulic drilling rig with a separate diesel power unit designed to carry out of micro/minipiles, anchors, etc., in difficult-to-reach areas such as the interior of houses. The module mast design enables it to perform drilling in spaces with a maximum height of 2.50 metres. The various joints combined with its exceptional compactness make it extremely versatile. The hydraulic unit can be equipped with either wheels or crawler. The machine can be equipped with a MORI remote control. Like all MORI drilling rigs, the M 21 can be customised according to customer requirements.
M40
Mori
0.0
No Rating
Based on 0 reviews
The M40 is a hydraulic drill designed for civil engineering drilling requirements. The compactness and the simple joints make it the ideal machine for restricted and difficult-to-reach areas, such as the interior of buildings, basements and small tunnels. In addition to its exceptional compactness, the M40 is equipped with the latest hydraulic circuit combined with very best engine type, all of which means the M40 offers exceptional performance. The machine can be equipped with a MORI remote control making it even more versatile. Like all MORI drilling rigs, the M 40 can be customised according to customer requirements.
P50
Mori
0.0
No Rating
Based on 0 reviews
The P50 is a high-performance hydraulic drilling rig purposefully designed for drilling deep water and geothermal wells. The sturdiness of the electro-welded steel structure and the distribution of the masses convey excellent stability. The P50 can be equipped with sludge pumps, hydraulic welder and MORI remote control making it extremely versatile. Like all MORI drilling rigs, the P50 can be customised according to customer requirements.
DPM 50/80 grappler
Mori
5.0
Outstanding
Based on 1 reviews
Premium quality rod and casing grappler , to help rod and casing in a same time. DPM 50/80 is a robust but versatile rod and casing grappler , with proven track record. 360 degrees, easy excavator installation
PM 20/35
Mori
0.0
No Rating
Based on 0 reviews
The PM 20/35 is a handling device for rods and casing to be installed on an excavator. It has been developed to facilitate the loading/unloading of drilling equipment (Rods, Casing and Augers) on the job site, with great advantages in terms of productivity and safety. The PM 20/35 is available with a single clamp, with interchangeable diameters inserts, capable to load and unload rods or casing individually.
M20 Alpine
Mori
0.0
No Rating
Based on 0 reviews
The M20 ALPINE is a special drilling rig designed to be transported by helicopter. The use of special steels and aircraft-grade aluminium means the machine has a reduced weight, and the ability to be dismantled into several pieces allows it to be transported by helicopter and to work in areas not accessible by normal means of transport, such as particularly inaccessible mountain areas. The M20 ALPINE equipped with a drifter is the ideal machine for performing micropiles, anchors and riveting with self-drilling bars. Like all MORI drilling rigs, the M 20 ALPINE can be customised according to customer requirements.
M41
Mori
0.0
No Rating
Based on 0 reviews
The M 41is a hydraulic drilling rig with a separate diesel power unit designed to carry out micro/minipiles, anchors, etc., in difficult-to-reach areas such as the interior of houses. The module mast design enables it to perform drilling in spaces with a maximum height of 2.50 metres. The various joints combined with its exceptional compactness make it extremely versatile. The hydraulic unit can be equipped with either wheels or crawler. The machine can be equipped with a MORI remote control. Like all MORI drilling rigs, the M 41 can be customised according to customer requirements.
M20
Mori
0.0
No Rating
Based on 0 reviews
The M 20 boasts excellent versatility and, due to its compactness, was purposefully designed to carry out micro/minipiles, anchors, etc., in particularly awkward working areas. The electro-welded steel structures ensure its sturdiness and the good distribution of its masses favours its stability The optimized hydraulic system, the modularity of the components, the possible movements and the easy access to controls by the operator have all been appropriately designed in accordance with current occupational health and safety regulations. Like all MORI drilling rigs, the M20 can be customized according to customer requirements.
M21
Mori
0.0
No Rating
Based on 0 reviews
The M 21is a hydraulic drilling rig with a separate diesel power unit designed to carry out of micro/minipiles, anchors, etc., in difficult-to-reach areas such as the interior of houses. The module mast design enables it to perform drilling in spaces with a maximum height of 2.50 metres. The various joints combined with its exceptional compactness make it extremely versatile. The hydraulic unit can be equipped with either wheels or crawler. The machine can be equipped with a MORI remote control. Like all MORI drilling rigs, the M 21 can be customised according to customer requirements.
M40
Mori
0.0
No Rating
Based on 0 reviews
The M40 is a hydraulic drill designed for civil engineering drilling requirements. The compactness and the simple joints make it the ideal machine for restricted and difficult-to-reach areas, such as the interior of buildings, basements and small tunnels. In addition to its exceptional compactness, the M40 is equipped with the latest hydraulic circuit combined with very best engine type, all of which means the M40 offers exceptional performance. The machine can be equipped with a MORI remote control making it even more versatile. Like all MORI drilling rigs, the M 40 can be customised according to customer requirements.
P50
Mori
0.0
No Rating
Based on 0 reviews
The P50 is a high-performance hydraulic drilling rig purposefully designed for drilling deep water and geothermal wells. The sturdiness of the electro-welded steel structure and the distribution of the masses convey excellent stability. The P50 can be equipped with sludge pumps, hydraulic welder and MORI remote control making it extremely versatile. Like all MORI drilling rigs, the P50 can be customised according to customer requirements.
Get in Touch with the Brand Owner About M19 Model
Why Customers Love Mori: Reviews & Testimonials
Sort by
Relevance
Is this review helpful?
0
Is this review helpful?
0
Is this review helpful?
0
Show more reviews (10)