2017 Tigercat L870C Tilter Buncher with 2017 Tigercat ST5702-16 WE SHIP DIRECT TO YOU, USA, and Worldwide!! Financing Available • Stock Number: 12214 CT • Located Near: Quesnel, BC • Engine: QSL 300 HP Cummins • Operating Weight: 78,572 lbs without attachment • Hours: 14,010 • Track Width: 28" • Felling Saw ST5702 • A/C and Heat • Contact us today if you need more information • JPH Equipment • Buying Made Simple • We Ship Worldwide • • Export/Duties/Tariffs/Transport not included. Additional fees will apply for export outside of Canada *We do not guarantee that these specifications are error-free or fully complete. The above specifications/details are provided as reference only and should be confirmed prior to purchase.*

HEM Saw VT100LM-45 Manual Vertical Band Saw

HEM Saw VT100LM-45 Manual Vertical Band Saw Specifications (subject to buyer verification): Blade: 1-1/4” x 15’ x 0” x .042 Capacity: 18” W x 22.25” H @ 90 Degrees Capacity: 18”W x 15” H @ 45 (Both Ways) Motor: 5 HP Drive Motor Equipped With (subject to buyer verification): Control Mounted on Front w/Touch Screen Manual Control Variable Frequency Controller Power Tilt w/Angle Readout on Touch Screen Full Stroking Main Vise w/Vari-Vise Pressure Adjustable Blade Speed w/Readout on Touch Screen Carbide Blade Guides Power Gide Arm Air Powered Blade Tension Adjustable Feed Rate & Cutting Force Boltable Side Wings for Coolant Drainage Built-in Coolant System w/Wash Down Hose Spray Mist Lubrication Laser Light System Stand Alonge Control w/3’ UMB

Amada HFA700CII Horizontal Band Saw Specifications (subject to buyer verification): Cutting Capacity Round (Diameter): 11.4” – 28” Z325: 3” – 25” Rectangle (W x H): 32” x 28” Workload Capacity: 17,640 lbs Material Index Stoke: 19.6” Index Length: 0.39” – 999.99” Remnant Length (for clamp clearance of 0.79” ) 1.38” Plus Length of Parts Saw Blade Dimensions (L x T x W): 27’ 3” x 0.063” x 2-5/8” Blade Speed: 50 – 394 ft./min, Inverter Saw Blade Motor: 15 HP Voltage: 220V Machine Dimensions Head up Position: 157.4” x 84.0” x 112.9” (W x L x H) Machine Dimensions Down Position: 157.4” x 84.0” x 112.9” (W x L x H) Table Height: 27.6” Machine Weight: 15,435 lbs Equipped With (subject to buyer verification): CNC Controlled Down Feed Automatically Positioned Guide Arm Drive by No Torque Loss Helical Bevel Gear Full Stoke Vises Programmable Operation by Micro-Processor Motion Detector Hydraulic Blade Tensioning Chip Conveyor Blade Deviation Monitor Vibration Damping Rollers Wheel Cover Limit Switch Piece Counter Blade Speed Controlled by Inverter Infeed roller table and outfeed table with coolant collection.

Amada HFA700CII Horizontal Band Saw Specifications (subject to buyer verification): Cutting Capacity Round (Diameter): 11.4” – 28” Z325: 3” – 25” Rectangle (W x H): 32” x 28” Workload Capacity: 17,640 lbs Material Index Stoke: 19.6” Index Length: 0.39” – 999.99” Remnant Length (for clamp clearance of 0.79” ) 1.38” Plus Length of Parts Saw Blade Dimensions (L x T x W): 27’ 3” x 0.063” x 2-5/8” Blade Speed: 50 – 394 ft./min, Inverter Saw Blade Motor: 15 HP Voltage: 220V Machine Dimensions Head up Position: 157.4” x 84.0” x 112.9” (W x L x H) Machine Dimensions Down Position: 157.4” x 84.0” x 112.9” (W x L x H) Table Height: 27.6” Machine Weight: 15,435 lbs Equipped With (subject to buyer verification): CNC Controlled Down Feed Automatically Positioned Guide Arm Drive by No Torque Loss Helical Bevel Gear Full Stoke Vises Programmable Operation by Micro-Processor Motion Detector Hydraulic Blade Tensioning Chip Conveyor Blade Deviation Monitor Vibration Damping Rollers Wheel Cover Limit Switch Piece Counter Blade Speed Controlled by Inverter Infeed roller table and outfeed table with coolant collection.