2005 Link Belt 160LX Excavator

2005 LINK BELT 160LX EXCAVATOR WITH ONLY 5000HRS! THIS UNIT HAS BEEN OWNER OPERATED SINCE NEW. PROFESSIONALLY SERVICED SINCE NEW. UNIT IS EQUIPPED WITH A FULLY PROGRESSIVE HYDRAULIC THUMB, AUX HYDRAULICS, PSM COUPLER, TIER 2 ISUZU ENGINE, EROPS W/ HEAT/AC, COMES WITH PSM ROCK GRAPPLE,(USED THREE TIMES OVER $25K NEW) 24″, 36″ AND 48″ BUCKETS. SELLING AS A PACKAGE. WILL NOT SEPARATE! UC AT ABOUT 75%. THIS UNIT HAS BEEN BABIED ALL ITS LIFE AND IS EXTREMELY TIGHT AND CLEAN. PRICE: 79,900 LOCATION: PLACERVILLE, CA HOURS: 5,000 2005 Link Belt 160LX Excavator Specs A. SHIPPING LENGTH OF UNIT 27.7 ft in 8440 mm C. SHIPPING HEIGHT OF UNIT 9.9 ft in 3020 mm I. MAX CUTTING HEIGHT 30.3 ft in 9240 mm J. MAX LOADING HEIGHT 21.7 ft in 6610 mm K. MAX REACH ALONG GROUND 29.1 ft in 8870 mm L. MAX VERTICAL WALL DIGGING DEPTH 16.7 ft in 5080 mm M. MAX DIGGING DEPTH 19.9 ft in 6060 mm Dimensions B. WIDTH TO OUTSIDE OF TRACKS 8.5 ft in 2580 mm D. LENGTH OF TRACK ON GROUND 10.5 ft in 3190 mm E. GROUND CLEARANCE 1.4 ft in 440 mm G. HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm H. TAIL SWING RADIUS 7.9 ft in 2410 mm O. COUNTERWEIGHT CLEARANCE 3.3 ft in 1020 mm Undercarriage F. TRACK GAUGE 6.5 ft in 1990 mm N. SHOE SIZE 23.6 in 600 mm Specification Engine MAKE Isuzu MODEL AI-4JJ1X NET POWER 120 hp 89.5 kw POWER MEASURED @ 2200 rpm DISPLACEMENT 183.1 cu in 3 L TORQUE MEASURED @ 1800 rpm MAX TORQUE 288 lb ft 390.5 Nm ASPIRATION Turbocharged NUMBER OF CYLINDERS 4 Operational OPERATING WEIGHT 37700 lb 17100.4 kg FUEL CAPACITY 79.3 gal 300 L COOLING SYSTEM FLUID CAPACITY 4 gal 15 L HYDRAUILC SYSTEM FLUID CAPACITY 43.6 gal 165 L ENGINE OIL CAPACITY 4.5 gal 17 L SWING DRIVE FLUID CAPACITY 1.3 gal 5 L OPERATING VOLTAGE 24 V ALTERNATOR SUPPLIED AMPERAGE 50 amps HYDRAULIC SYSTEM RELIEF VALVE PRESSURE 4970 psi 34266.9 kPa HYDRAULIC PUMP FLOW CAPACITY 75 gal/min 283.9 L/min Swing Mechanism SWING SPEED 11.5 rpm SWING TORQUE 33264 lb ft 45099.9 Nm Undercarriage NUMBER OF SHOES PER SIDE 44 SHOE SIZE 23.6 in 600 mm NUMBER OF CARRIER ROLLERS PER SIDE 2 NUMBER OF TRACK ROLLERS PER SIDE 7 GROUND PRESSURE 5.8 psi 40 kPa MAX TRAVEL SPEED 3.4 mph 5.5 km/h TRACK GAUGE 6.5 ft in 1990 mm Buckets REFERENCE BUCKET CAPACITY 0.95 yd3 0.73 m3 MINIMUM BUCKET CAPACITY 0.5 yd3 0.38 m3 MAXIMUM BUCKET CAPACITY 1.1 yd3 0.87 m3 Boom/Stick Option (HEX) 1 BOOM/STICK OPTION (HEX) 1 Boom 16’11” (5150mm) / Stick 8’7″ (2620mm) SHIPPING HEIGHT OF UNIT 9.9 ft in 3020 mm SHIPPING LENGTH OF UNIT 27.7 ft in 8440 mm MAX DIGGING DEPTH 19.9 ft in 6060 mm MAX REACH ALONG GROUND 29.1 ft in 8870 mm MAX CUTTING HEIGHT 30.3 ft in 9240 mm MAX LOADING HEIGHT 21.7 ft in 6610 mm MAX VERTICAL WALL DIGGING DEPTH 16.7 ft in 5080 mm Boom/Stick Option (HEX) 2 BOOM/STICK OPTION (HEX) 2 Boom 16’11” (5150mm) / Stick 10’0″ (3050mm) SHIPPING HEIGHT OF UNIT 10.3 ft in 3130 mm SHIPPING LENGTH OF UNIT 28 ft in 8520 mm MAX DIGGING DEPTH 21.3 ft in 6490 mm MAX REACH ALONG GROUND 30.2 ft in 9220 mm MAX CUTTING HEIGHT 30.5 ft in 9290 mm MAX LOADING HEIGHT 21.9 ft in 6690 mm MAX VERTICAL WALL DIGGING DEPTH 17.1 ft in 5220 mm Dimensions WIDTH TO OUTSIDE OF TRACKS 8.5 ft in 2580 mm HEIGHT TO TOP OF CAB 9.9 ft in 3020 mm GROUND CLEARANCE 1.4 ft in 440 mm COUNTERWEIGHT CLEARANCE 3.3 ft in 1020 mm TAIL SWING RADIUS 7.9 ft in 2410 mm LENGTH OF TRACK ON GROUND 10.5 ft in 3190 mm